Stainless Steel Recycling Bin with Pie-Slice Compartments

The SRB-201 stainless steel recycling bin is produced in 2-, 3-, and 4-compartment configurations, all sharing a Ø48 cm diameter and 75 cm height. The body and internal partition walls are fabricated from AISI 304 stainless steel. The internal volume is divided into equal radial sections by vertical partition walls, with each section accessed through a separate pie-slice opening on the top surface. The product carries a registered design certification.

The SRB-201 is a single freestanding cylindrical bin internally divided into multiple compartments arranged radially around the central axis. The top surface is cut into pie-slice openings, one per compartment. The exterior carries a recycling symbol and bilingual category labels around the upper rim.

Stainless Steel Recycling Bin Configurations

Compartment Variants

The SRB-201 is offered in three configurations: 2 compartments dividing the cylinder into halves, 3 compartments dividing it into thirds, and 4 compartments dividing it into quarters. Diameter and height remain fixed at 48 cm and 75 cm across all variants.

Material Construction

The cylindrical body, internal partition walls, and the divided top surface are fabricated from AISI 304 stainless steel. The exterior is supplied with a brushed surface finish without coating.

Pie-Slice Compartment Configuration

The internal volume of the cylinder is divided into equal radial sections by vertical partition walls running from base to top. The top surface is cut into pie-slice openings, with each opening sized to its assigned waste category. Categories are identified through bilingual labels positioned around the upper rim.

Design Registration and Construction Specifications

The SRB-201 carries a registered design certification. All structural joints are welded, with weld seams ground smooth and edges deburred. The unit sits directly on the ground without flange or anchoring hardware. Production is project-based; retail sales are not offered.