The SRB-288 stainless steel recycling bin set is produced in 2-, 3-, 4-, and 5-cylinder configurations, with each cylinder sharing a 30 cm depth and 80 cm height. Total length scales with the number of cylinders from 65 cm to 155 cm. Standard production uses AISI 304 stainless steel for the cylindrical bodies and DKP cold-rolled steel with electrostatic powder coating for the dome-shaped rotating lids. As an alternate construction, both the body and the lids can be produced from DKP cold-rolled steel with electrostatic powder coating in any RAL color specified per project.
The SRB-288 is a freestanding set of cylindrical stainless steel bins arranged side by side and joined to one another by inter-bin connector rods rather than a continuous cradle frame. Each cylinder carries a dome-shaped rotating lid finished in a contrasting RAL color matched to its waste category, and a graphic label on the front face.
Stainless Steel Recycling Set Configurations and Materials
Cylinder Variants
The SRB-288 is offered in four configurations: 2 cylinders (65 cm total length), 3 cylinders (95 cm), 4 cylinders (125 cm), and 5 cylinders (155 cm). Diameter and height remain fixed at 30 cm and 80 cm per cylinder across all variants.
Material Construction
The standard cylindrical bodies are fabricated from AISI 304 stainless steel with a brushed exterior finish. The dome-shaped rotating lids are fabricated from DKP cold-rolled steel and finished with electrostatic powder coating. As an alternate construction, the cylindrical bodies can also be produced from DKP cold-rolled steel with electrostatic powder coating, supplying the unit in a fully painted finish. Color is specified per project; any RAL code can be matched.
Dome Rotating Lid Mechanism
Each cylinder is fitted with a dome-shaped top lid mounted on a pivot axis spanning the opening. The lid rotates fully through 360 degrees, allowing waste to be deposited from either direction and returning to the resting position after release. The dome geometry blocks direct vertical access to the bin interior when the lid is at rest.
Inter-Bin Connector Rods and Construction Specifications
Adjacent cylinders are joined to one another by vertical metal connector rods welded between the bodies, holding the cylinders in fixed relative positions without a separate base frame. Each cylinder rests directly on the ground through its own base. All structural joints are welded, with weld seams ground smooth and edges deburred. Production is project-based; retail sales are not offered.
| Code | Cylinders | Depth | Total Length | Height | Volume (L) |
|---|---|---|---|---|---|
| SRB-288-2 | 2 | 30 cm | 65 cm | 80 cm | 147.00 |
| SRB-288-3 | 3 | 30 cm | 95 cm | 80 cm | 214.00 |
| SRB-288-4 | 4 | 30 cm | 125 cm | 80 cm | 282.00 |
| SRB-288-5 | 5 | 30 cm | 155 cm | 80 cm | 349.00 |
